FAG 22212-E1-C4 Spherical Roller Bearings

D1:90.9 mm; Radial clearance class:> C5; Characteristic cage frequency, FTF:0.41 Hz; da min:63 mm; Characteristic outer ring frequency, BPF0:4.08 Hz; D:100 mm; Mass:0.58 kg; Characteristic inner ring frequency, BPFI:5.92 Hz; Dynamic load, C:0.01 kN; Max operating temperature, Tmax:350 °C;

SW:4 mm; S:11 mm; C1:6.2 mm; T min.:-20 °C; B:30.2 mm; B2:18.3 mm; B1:43.7 mm; G:M8x1; d:40 mm; T max.:200 °C;

E:24 mm; L3:46 mm; d:50 mm; A2:40 mm; B:51.6 mm; Weight:1.8 kg; s1:25.8 mm; H:110 mm; T max.:100 °C; T min.:-20 °C;

A:36 mm; B:49.2 mm; C:29.6 kN; Recommended tightening torque for set screw:8 Nm; e:21 mm; H:175 mm; N:16mm; Designation of bearing:UC208-24G2; J:144 mm; Designation of housing:FL208N-;

Seal Type:Triple Lip; Retainer Material:Polymer; Bearing Duty:Normal Duty; End Cap Groove:Yes; Shaft Attachment (2):Set Screw; Anti-Rotation Pin:Yes; Self Aligning:Self Centering; Ship Weight:2.9 LB; Brand:Baldor-Dodge; Housing Coating:Powder Coat;

UNSPSC:31171504; Outer Race Width:0.315 Inch | 8 Milli; Inch - Metric:Metric; Noun:Bearing; Internal Special Features:No; Outside Diameter:1.024 Inch | 26 Mill; Fatigue limit load, Cu:0.09 kN; da min:13 mm; Long Description:9MM Bore; 26MM Outsi;

s1:27.8 mm; A1:15 mm; J:184 mm; Weight:3.22 kg; d:55 mm; Z:43.1 mm; A2:61.4 mm; B:55.6 mm; L:134 mm; T min.:-40 °C;

L1:61 mm; Weight:0.81 kg; C0:6.65 kN; SW:3 mm; A:32 mm; L2:10 mm; N2:32 mm; T min.:-20 °C; T max.:100 °C; s1:15.5 mm;

d:25 mm; Snap Ring:No; UNSPSC:31171504; Characteristic inner ring frequency, BPFI:4.39 Hz; Da max:55.5 mm; Cage Material:Steel; f0:12.6; Harmonized Tariff Code:8482.10.50.68; Weight / Kilogram:0.23; Radial clearance class:C3;

Bearing Family:Grip Tight Ball Bear; Ring Size:Standard; Retainer Material:Nylon; Brand:Baldor-Dodge; Max Bearing Speed:4500 rpm; d:2.9375 in; Ship Weight:30.16 LB; Bearing Outer Ring Material:Steel; Self Aligning:Yes; Bearing Bore Shape:Round;

Designation of bearing:UC205-16G2T04; Z:26.6 mm; Designation of housing:FLE205N-; A2:38.7 mm; A:29.3 mm; B:34 mm; s1:17 mm; T max.:100 °C; G:R1/8"; H:124 mm;

B:34 mm; d:38.1 mm; N1:23 mm; A1:34 mm; H:49.2 mm; N:17mm; C:29.6 kN; L1:52 mm; J:137 mm; Recommended tightening torque for set screw:8 Nm;

C:19.5 kN; T min.:-20 °C; Z:52.5 mm; Designation of open end cover:SCOU206-19; d:30.16 mm; T max.:200 °C; A5:22 mm; A2:28 mm; N1:16 mm; C0:11.2 kN;

Designation of bearing:ES207G2T04; d1:51.1 mm; Z:77 mm; J:127 mm; B1:38.9 mm; B:25.4 mm; d:35 mm; N:17mm; Designation of open end cover:SCOE207-35; A:60 mm;

A:94 mm; B:100 mm; Designation of housing:FL320-; Weight:27.9 kg; s1:86.5 mm; J:360 mm; A2:137.6 mm; B1:128.6 mm; T min.:-20 °C; d1:146 mm;