SKF 6309-2Z/C3GJN Single Row Ball Bearings

e - ISO Factor8:0.41; Y - ISO Factor9:1.48; Ab - Cage-Cone Frontface Clearance:3.3 mm; r - Cup Backface To Clear Radius2:2.03 mm; Design Units:METRIC; a - Effective Center Location3:-8.1 mm; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):160.9; db - Cone Backface Backing Diame

Bearing Material:[Steel] Steel; Volume Discount:Available; Days to Ship:8 Days; Type:Bearings with Housin; Volume Discount:Available; Number of Bearings:Double; Seals:ZZ (Double Shield); Bearing Part Number:6806; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating;

ras max:0.15 mm; da min:6.2 mm; Mass:0.0014 kg; t:1 mm; rs min:0.15 mm; d:5 mm; Lubrication hole on inner ring:Non/No; Brand:NTN; F:7 mm; Precision class:P0;

Width T(mm):65 ～ 120; Number of Bearings:Double; Bearing Part Number:6008; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Shape:Flanged Pilot Type; Number of Bearings:Double; RoHS:6;

A:40 mm; B1:43.7 mm; T min.:-40 °C; B:30.2 mm; s1:33.4 mm; A2:54.7 mm; Weight:2.2 kg; d1:67.2 mm; C:35.1 kN; N:15mm;

Cor - Static Load Rating:289779 lbf; Series Type:Light Series; Dimension P:1.4 in; Cr - Dynamic Load Rating:167258 lbf; Bearing Type:Split Cylindrical Ex; Support Type:Round Flange; Maximum Speed:820 rpm; Bearing - Housing - Seal:LSE908BXHRSS; Note:This product line wa; Shaft Size:9.5 in;

Mount Type:Base Face Type; Seals:ZZ (Double Shield); Height H(mm):20 ～ 40; Days to Ship:8 Days; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Bearing Part Number:6000; RoHS:6; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):10;

Number of Bearings:Double; Volume Discount:Available; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Shape:Flange Type; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Flange Shape:Round Type;

Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Width T(mm):18; Holder Surface Treatment:Electroless Nickel P; Bearing Material:[Steel] Steel; Flange Shape:Square Type; Bearing Retained:Yes (with retaining; Volume Discount:Available; Shape:Flange Typ

Design Units:Imperial; d:1.8750 in; da - Cone Frontface Backing Diameter:2.44 in; B - Cone Width:1.0594 in; C0 - Static Radial Rating:36200 lbf; Series:55000C; G2 - Heat Generation Factor (Rib-Roller End):15.4; a - Effective Center Location4:0.3 in; Cage Type:Stamped Steel; Cone Part Number:55187C;

Unit, Type:Insert Bearing Unit; Grease Type:Standard Grease; Fit:J7; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Dynamic Rating(N):34100; Surface Treatment:No; Rolling Element Material:Bearing Steel; Rolling Element Material:Bearing Steel; Basic Load Rating, Static Rating(N):21

Designation of bearing:UC209G2; A:60 mm; G:M6x1; B:49.2 mm; s1:24.6 mm; L1:42 mm; L:120 mm; C0:20.8 kN; T max.:100 °C; S:19 mm;

Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Shape:T-Shaped; Type:Bearings with Housin; Type:Bearings with Housin; Bearing Part Number:6005; C Chamfered:Not Provided; Bearing Retained:No;

D:72 mm; d:34.92 mm; S:8.5 mm; SW:3.97 mm; C1:5.7 mm; r:0.6; C:17 mm; G:5/16-24UNF; m:6.5 mm; Recommended tightening torque for set screw:8 Nm;

Maximum Speed:2520 rpm; Dimension R:1.4 in; Dimension D:12.0 in; Bearing UPC:013992032119; Dimension V:6.0 in; Cor - Static Load Rating:79358 lbf; Dimension X:1.4 in; Bearing Type:Split Cylindrical Re; Cr - Dynamic Load Rating:66768 lbf; Shaft Size:3-3/16 in;